Radio GaGa updated Sept 10 2016

(Added the name plate with callsign etc to the vhf panel – pic below)

I had to replace the old VHF, as the mic lead had disintegrated in the heat of the Caribbean. Or… Mice?

The new one was a different size profile, and I only had a Dremel, so I made a bad job of fitting it into the “cubby”, as I was just trying to get everything ready to escape before Christmas.

I have made a new frame to fit the vhf, and bought a couple of adapters, so that it is attached to the fascia, rather than to a stand. The pics will explain. 

Note that slot cut into the inner hull side – you can see light through the hull. I am guessing that the original vhf was bigger and the installer cut into the inner hull and 2″ of foam, to give space to the radio’s heat sink.

A bit of varnish makes all the difference…shame I could not match the wood. I have ordered an engraved plate with Vessel Name, call sign (Mike Echo Charlie Whisky Eight), O/N 701429 and MMSI (too long).

A bit messy – someone else before my time added the white gunge, by the way. 

All set, and it works better too!